SERVICES
SERVICE & MAINTENANCE
WHY HAVE AIR CONDITIONING UNITS SERVICED?
Did you know that dirty systems can cost you more money in the long run? When a system is clogged with dirt and debris, it has to work harder to function properly, using more energy and leading to higher energy bills and a shortened lifespan.
On the other hand, regular maintenance offers numerous benefits. It not only improves the comfort level of your home or office but also boosts efficiency and reliability. This can reduce repair costs and extend the lifespan of your system.
Don’t let dirty systems cost you more. Invest in regular maintenance to protect your investment and ensure your system runs at its best. Contact us today to learn more about our maintenance services and how they can help you save money and extend the life of your system.
PLANNED MAINTENANCE PROGRAM
Are you wondering how often you should have your air conditioning system serviced? The answer depends on a few factors, including the environment in which you use the equipment and the level of usage. As a general rule of thumb, it is recommended to have your residential AC system serviced at least once per year. For commercial premises, such as offices and shops, it is recommended to have the system serviced twice per year. In environments with high levels of pollutants, such as hair salons and beauty salons, it may be necessary to have the system serviced three or more times per year.
Regular AC maintenance is essential for ensuring that your system is running efficiently and effectively. Not only does it help to prolong the lifespan of your equipment, but it can also save you money on energy bills and costly repairs. Our team offers a customizable planned maintenance program that is tailored to your specific needs. Contact us today to schedule your next AC maintenance service.
SERVICE & MAINTENANCE
WHAT DOES A SERVICE INCLUDE?
In a typical service a vast array of checks and cleaning operations are carried out to ensure the smooth operation of your system.
✓ Temperature monitor
Full temperature assessment of indoor and outdoor fan coils to monitor health of system.
✓ Filters cleaned and protected
Our engineers will ensure your system is cleaned properly using our unique antibacterial foam and spray.
✓ Outdoor coils cleaned
Using our special coil cleaner all outdoor units are thoroughly cleaned and protected.
SERVICE & MAINTENANCE
SERVICE CHECKLIST
Please find below the work that we carry out during a service procedure
Inside Unit
Condensate Pump
- Check operation of condensate pump.
- Locate collection reservoir tank and clean out any dirt.
- Check pump operation with clean water. Refit these items.
System Operation
- Confirm system is in accordance with design parameters.
- If poor performance, check refrigerant charge (deficiency implies a possible leak).
Condensate Drains and Drip Tray
- Check condensate drain is clear and clean.
- Disinfect tray and trap with antibacterial disinfectant.
- Drain and thoroughly flush tray and trap in condensate tray.
EXTRA – Refrigerant Leaks
- NOTE: This is outside the scope of the basic maintenance check – if a leak is found on the system following repair work is involved: Remove gas from the system & pressure-test system to find leaks. Repair & retest until satisfactory. Check existing refrigerant suitable for returning to system; if so recharge system and top up as necessary.
Fans and Motors
- Check bearings and lubricate as necessary.
- Clean fans where possible without removal.
- EXTRA – Fan removal for cleaning due to age/condition will incur extra charges.
Evaporator Coil Fins
- Check for damage or dust accumulation; clean with antibacterial coil cleaner.
General Cleanliness
- Wipe clean the unit casing with an appropriate cleaner.
Pipe Thermal Insulation
- Check condition where possible and visible.
- EXTRA – Repair and reseal as necessary. This will incur an extra charge.
Controls
- Clean and check operation of all thermistors and sensors.
Electrical Connections
- Check for damage to wires and connections.
- Tighten all terminal connections on unit and local isolator.
Air Filter Elements
- Remove and clean or replace as per manufacturers recommendations.
- EXTRA – If filters need replacing due to contamination, this will be charged as extra.
Outside Unit
Compressor
- Check for undue noise or vibration and high or low cylinder head discharge pressure.
Controls
- Clean and check operation of all unit controls, sensors, and safety devices.
Condenser Coil Fins
- Check for damage and/or dust accumulation. Clean as necessary. Comb fins if required.
Fans and Motors
- Check bearings and lubricate as necessary.
General Cleanliness
- Clean surfaces of compressor and components of the condensing unit.
- Wipe clean unit casings.
Refrigerant Pipework
- Check for damage.
- Check condition where possible and visible.
- EXTRA – Repair and reseal as necessary, this will be charged as an extra.
System Operation
- Confirm that it is in accordance with design parameters.
Electrical Connections
- Check integrity of electrical insulation for damage to wires and connections. Isolate and inspect for continuity.
Compressor Mounting
- Check for abnormal wear and tear.
GET IN TOUCH
Don’t let a broken or poor performing air conditioning system ruin your comfort. Contact us now and let our experts help you get your system running smoothly. We’re here to help with all your air conditioning service and repair needs. Don’t hesitate, reach out to us today!
